In order to make adjustments to the brackets, you will need to move all of the
entrants down one slot. It does not matter which entrant that you select within
the bracket, using this option will cause the entrant in the lowest slot to
be Bumped down to the next bracket, which will then cause the lowest
entrant in the next bracket to be Bumped to the next bracket and
so on till the process gets to the last bracket. You may want to add a Bye
to the bracket that is now short an entrant. See Adding a Bye.
Step 1. On the Brackets View with the brackets
unlocked, select the bracket that you wish to Bump the entrant from
and then click the Bump button as shown below.
Step 2. Review the results.
